oracle数据库如何从32位平台迁移到64位？

作者：袖梨 2022-06-29

1：备份oracle数据库

2：备份控制文件到trace（以备需要新建控制文件）

代码如下

复制代码

SQL> alter database backup controlfile to trace;

Database altered.

SQL> oradebug setmypid
Statement processed.
SQL> oradebug tracefile_name
/u01/app/admin/easy/udump/easy_ora_18830.trc
SQL> host cat /u01/app/admin/easy/udump/easy_ora_18830.trc
......
--
--     Set #1. NORESETLOGS case
--
-- The following commands will create a new control file and use it
-- to open the database.
-- Data used by Recovery Manager will be lost.
-- Additional logs may be required for media recovery of offline
-- Use this only if the current versions of all online logs are
-- available.
-- After mounting the created controlfile, the following SQL
-- statement will place the database in the appropriate
-- protection mode:
-- ALTER DATABASE SET STANDBY DATABASE TO MAXIMIZE PERFORMANCE
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "EASY" NORESETLOGS NOARCHIVELOG
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 100
    MAXINSTANCES 8
    MAXLOGHISTORY 292
LOGFILE
GROUP 1 '/oradata/easy/redo01.log' SIZE 11200K,
GROUP 2 '/oradata/easy/redo02.log' SIZE 11200K
-- STANDBY LOGFILE
DATAFILE
'/oradata/easy/system01.dbf',
'/oradata/easy/undotbs01.dbf',
'/oradata/easy/sysaux01.dbf',
'/oradata/easy/users01.dbf'
CHARACTER SET ZHS16GBK
;
-- Commands to re-create incarnation table
-- Below log names MUST be changed to existing filenames on
-- disk. Any one log file from each branch can be used to
-- re-create incarnation records.
-- ALTER DATABASE REGISTER LOGFILE '/u01/app/flash_recovery_area/EASY/archivelog/2014_11_05/o1_mf_1_1_%u_.arc';
-- ALTER DATABASE REGISTER LOGFILE '/u01/app/flash_recovery_area/EASY/archivelog/2014_11_05/o1_mf_1_1_%u_.arc';
-- Recovery is required if any of the datafiles are restored backups,
-- or if the last shutdown was not normal or immediate.
RECOVER DATABASE
-- Database can now be opened normally.
ALTER DATABASE OPEN;
-- Commands to add tempfiles to temporary tablespaces.
-- Online tempfiles have complete space information.
-- Other tempfiles may require adjustment.
ALTER TABLESPACE TEMP ADD TEMPFILE '/oradata/easy/temp01.dbf'
     SIZE 20971520 REUSE AUTOEXTEND ON NEXT 655360 MAXSIZE 32767M;
-- End of tempfile additions.
--
--     Set #2. RESETLOGS case
--
-- The following commands will create a new control file and use it
-- to open the database.
-- Data used by Recovery Manager will be lost.
-- The contents of online logs will be lost and all backups will
-- be invalidated. Use this only if online logs are damaged.
-- After mounting the created controlfile, the following SQL
-- statement will place the database in the appropriate
-- protection mode:
-- ALTER DATABASE SET STANDBY DATABASE TO MAXIMIZE PERFORMANCE
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "EASY" RESETLOGS NOARCHIVELOG
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 100
    MAXINSTANCES 8
    MAXLOGHISTORY 292
LOGFILE
GROUP 1 '/oradata/easy/redo01.log' SIZE 11200K,
GROUP 2 '/oradata/easy/redo02.log' SIZE 11200K
-- STANDBY LOGFILE
DATAFILE
'/oradata/easy/system01.dbf',
'/oradata/easy/undotbs01.dbf',
'/oradata/easy/sysaux01.dbf',
'/oradata/easy/users01.dbf'
CHARACTER SET ZHS16GBK
;
-- Commands to re-create incarnation table
-- Below log names MUST be changed to existing filenames on
-- disk. Any one log file from each branch can be used to
-- re-create incarnation records.
-- ALTER DATABASE REGISTER LOGFILE '/u01/app/flash_recovery_area/EASY/archivelog/2014_11_05/o1_mf_1_1_%u_.arc';
-- ALTER DATABASE REGISTER LOGFILE '/u01/app/flash_recovery_area/EASY/archivelog/2014_11_05/o1_mf_1_1_%u_.arc';
-- Recovery is required if any of the datafiles are restored backups,
-- or if the last shutdown was not normal or immediate.
RECOVER DATABASE USING BACKUP CONTROLFILE
-- Database can now be opened zeroing the online logs.
ALTER DATABASE OPEN RESETLOGS;
-- Commands to add tempfiles to temporary tablespaces.
-- Online tempfiles have complete space information.
-- Other tempfiles may require adjustment.
ALTER TABLESPACE TEMP ADD TEMPFILE '/oradata/easy/temp01.dbf'
     SIZE 20971520 REUSE AUTOEXTEND ON NEXT 655360 MAXSIZE 32767M;
-- End of tempfile additions.
--

3: 查看当前的数据库状态

代码如下

复制代码

SQL> select count(*) from dba_objects where status ='INVALID';

COUNT(*)
----------
    0

SQL> select comp_name,status from dba_registry;

COMP_NAME                STATUS
---------------------------------------- ----------------------
Oracle Database Catalog Views        VALID
Oracle Database Packages and Types    VALID
Oracle Workspace Manager        VALID
JServer JAVA Virtual Machine        VALID
Oracle XDK                VALID
Oracle Database Java Packages        VALID
Oracle Expression Filter        VALID
Oracle Data Mining            VALID
Oracle Text                VALID
Oracle XML Database            VALID
Oracle Rules Manager            VALID

COMP_NAME                STATUS
---------------------------------------- ----------------------
Oracle interMedia            VALID
OLAP Analytic Workspace         VALID
Oracle OLAP API             VALID
OLAP Catalog                VALID
Spatial                 VALID
Oracle Enterprise Manager        VALID

17 rows selected.

4：拷贝参数文件，控制文件，数据文件，日志文件到64位数据库

5：在64位系统上创建相应目录，如udmp adump等，要和32位系统一致

6：如果数据库的数据文件目录发生变化，则需要新建控制文件，（最好保持源库和目标库的一致，减少工作量和错误发生率）

7：将数据库中的存储过程等置为失效,UTLIRP脚本会将存储过程等置为失效

代码如下	复制代码
--如果迁移的是oracle9i的数据库，执行如下命令： SQL> STARTUP MIGRATE --如果是Oracle10g或11g，执行如下命令： SQL> STARTUP UPGRADE SQL> SPOOL EASY.log; SQL> @$ORACLE_HOME/rdbms/admin/utlirp.sql SQL> SPOOL OFF;

8: 重新启动数据库，

9: 如果数据库有OLAP组件，则删除OLAP，以sys用户执行如下脚本

代码如下

复制代码

SQL> conn / as sysdba

----> Remove OLAP Catalog
SQL> @?/olap/admin/catnoamd.sql

----> Remove OLAP API
SQL> @?/olap/admin/olapidrp.plb
SQL> @?/olap/admin/catnoxoq.sql

----> Deinstall APS - OLAP AW component
SQL> @?/olap/admin/catnoaps.sql
SQL> @?/olap/admin/cwm2drop.sql ---只需要在11g中执行。在10g中，catnoamd.sql 脚本中已经包含了该脚本，所以不用执行

You could getsome invalid objects under SYS and PUBLIC owner, and they are the old duplicate OLAPSYS objects copied under these schemas when Olap has been installedpreviously.
Generally, theOlap objects are named with context like %OLAP%, %AWM%, or other Olap word keys intheir "object_name" field, however, if it needs a help to recognizethem, then please contact Oracle Support and create a Service Request toget assistance for this question.

Note that catnoadm.sql could fail from 10.1.0.5 to 11.1.0.7release.

Due to the factthat it refers to three scripts which don't get shipped until 11.2 this scriptwill fail.
Besides that itwill error on 7 non-existing synonyms to drop.

Prior 11.2, execute these three dropsynonym statements:

SQL> drop public synonym OlapFactView;
SQL> drop public synonym OlapDimView;
SQL> drop public synonym DBMS_ODM;

10：编译失效对象

代码如下	复制代码
SQL> @?/rdbms/admin/utlrp.sql

此时会有错误，这是因为olap没有安装，下面安装olap，然后重新编译

11：添加OLAP

代码如下	复制代码
SQL> @?/olap/admin/olap.sql SYSAUX TEMP; SQL> @?/rdbms/admin/utlrp.sql --这次会非常快

12. 验证无效对象和组件状态

代码如下

复制代码

SQL> l
1* select count(*) from dba_objects where status<>'VALID'
SQL> col comp_name for a40
SQL> select comp_name,status from dba_registry;

COMP_NAME                STATUS
---------------------------------------- ----------------------
Oracle Database Catalog Views        VALID
Oracle Database Packages and Types    VALID
Oracle Workspace Manager        VALID
JServer JAVA Virtual Machine        VALID
Oracle XDK                VALID
Oracle Database Java Packages        VALID
Oracle Expression Filter        VALID
Oracle Data Mining            VALID
Oracle Text                VALID
Oracle XML Database            VALID
Oracle Rules Manager            VALID

COMP_NAME                STATUS
---------------------------------------- ----------------------
Oracle interMedia            VALID
OLAP Analytic Workspace         VALID
Oracle OLAP API             VALID
OLAP Catalog                VALID
Spatial                 VALID
Oracle Enterprise Manager        VALID

11：重新编译java对象

代码如下

复制代码

begin
update obj$ set status=5 where obj#=(select obj# from obj$,javasnm$ where owner#=0 and type#=29 and short(+)=name and nvl(longdbcs,name)='oracle/aurora/rdbms/Compiler');
commit;
declare
    cursor C1 is select 'DROP JAVA DATA "'||u.name||'"."'||o.name||'"' from obj$ o,user$ u where o.type#=56 and u.user#=o.owner#;
    ddl_statement varchar2(200);
    iterations number;
    previous_iterations number;
    loop_count number;
    my_err     number;
begin
    previous_iterations := 10000000;
    loop
      select count(*) into iterations from obj$ where type#=56;
      exit when iterations=0 or iterations >= previous_iterations;
      previous_iterations := iterations;
      loop_count := 0;
      open C1;
      loop
        begin
          fetch C1 into ddl_statement;
          exit when C1%NOTFOUND or loop_count > iterations;
        exception when others then
           my_err := sqlcode;
           if my_err = -1555 then
             exit;
           else
             raise;
           end if;
        end;
        initjvmaux.exec(ddl_statement);
        loop_count := loop_count + 1;
      end loop;
      close C1;
    end loop;
end;
commit;
initjvmaux.drp('delete from java$policy$shared$table');
update obj$ set status=1 where obj#=(select obj# from obj$,javasnm$ where owner#=0 and type#=29 and short(+)=name and nvl(longdbcs,name)='oracle/aurora/rdbms/Compiler');
commit;
end;
/